Why You Should Focus On The Improvement Of Electric Fireplace Wall Hanging
Electric Fireplace Wall Hanging Ideas
The wall-mount electric fireplaces are available to use right out of the box. These electric fireplaces are ideal for adding the ambience of your home without the need for remodeling or venting.
However, they often require careful installation because they're usually heavy. Follow these steps to set up your new electric fire in the correct way.
1. Connect the Brackets
A wall-mounted electric fireplace or recessed electric fire instantly transforms any room. It's the ideal option for homes with no existing fireplace opening or for apartment dwellers.
First, you must decide where to place your new electric fireplace. You should choose a place that is not susceptible to moisture, and at a minimum, a few feet away from furniture and drapes. Once you've located a location you like, mark the wall with lines for the top and bottom plates of the fireplace frame.
Use a tool such as a drill to drill exploratory holes into the wall, looking for studs with a stud detector and marking on the drywall the location of the fireplace mounting brackets. Then, patch and paint the drywall or build out the wall to prepare it for the fireplace installation.
Depending on your chosen wall-mounted fireplace, you could have to either install the firebox and screen as one unit or separate them using the use of a wall bracket. If you aren't sure of your ability to complete this project employ a general contractor or a skilled carpenter.
Most electric fireplaces include a template for the installation procedure, but you must also have a spirit level and pencil in hand to precisely mark the location where you'll attach the wall brackets. Before drilling, use the template to check that the power cable of the fireplace can reach from the installation site to an outlet near by for a convenient plug in.
When the studs and fireplace frame are in place, you can put in drywall that is as smooth and flush as you can for a clean appearance. Add a trim piece to the bottom edge and then sand and paint the entire frame to give it a finished look.
Most wall-mounted electric fires come with hooks or slots on the back of the unit which you can insert into the slots or hooks on the mounting brackets. Make sure to make sure that the slots or hooks are aligned before connecting the fire brackets. Once the fire is in place you can add other elements such as driftwood logs, crystal embers, or decorative rocks.
2. Check the Bottom Bracket
The space above a fire mantel, chimney breast, or mantel is prime real estate to hang artwork. There is a delicate balance between an artistic arrangement and one that doesn't detract from the overall design of the fireplace.
The general rule of the thumb is that a painting should be about 80 percent of the size of the mantel or firebox it is placed above. This will keep it proportionate and will make it look nice on the wall. Other ornaments & decorative items placed on the mantel could also influence this size & proportional guidelines.
If you are planning to display a photo above your electric fireplace, the frame should be made of glass or another material that can withstand high temperatures. If you're not sure then a quick test using a cloth that is heat-sensitive will reveal whether the frame is suitable for this type of application.
A common concern with the display of artwork above the fireplace is the possibility of damage to the artwork from smoke or heat that escapes. This is not a problem with a wood- or gas-powered fireplace. However, if you plan to install an electric wall-mounted fire, it's important to check the manufacturer's instructions.
The majority of electrical fires come with an installation bracket that can be attached to the wall with either hanging screws or a wall-mounted fixing system. If the latter is the case, it's recommended that you drill exploratory holes into an isolated area of the wall prior to when you begin mounting your electric fire. You can then use a pipe and cable finder to ensure that there aren't any cables or pipes close to the location where you want to mount your fire.
If they are the electrical sockets, you can decide to put your fire above the electrical socket, or move it to a new location. If white wall mounted electric fireplace decide to move it, you must make sure that the power cable can reach the electrical socket. This is crucial especially for older homes and those with solid walls. In the event that it doesn't the electric fire will not be able to function properly. Some models come with a template to show you the locations to drill holes, while others require you to use an apex level and pencil to mark the location on your wall.
3. Connect the Power Cord
It is possible to relocate your plug socket in front of the unit if you have installed a fireplace that is recessed. This can create a sleeker look. Be sure to test your fireplace prior to making this change to make sure that everything functions exactly as it should.
The third option to install an electric fireplace is by framing the space and building it into the wall. This gives it a finished, traditional look and allows you to add an additional mantel. The owner's manual for the specific model will have details on framing, securing your fireplace, and wiring.
Mark the location of your new electric fireplace on the wall with either a pencil or marker. Then, use a carpenter's level to make sure that the area of installation is flat and level. You can also employ a stud locater to mark the location of studs so that you are sure that you're drilling into a safe spot.
Once you've marked the location of the installation then use your electric drill to create holes for the bracket screws or hanging screws. Follow the directions in your owner's guide for this step. This is especially important if you're putting the fireplace in drywall. If you're unsure of how to go about it, you can always ask a professional to take care of the installation for you.
A cable organizer kit can be used to conceal power cords. These kits typically include sleeves, clips, or boxes for bundling cables. You can also use wire snake tools to guide the cables through the wall. If you don't want to cut the drywall, a powerbridge kit can provide a more secure and more secure connection.
Additionally, you can disguise the cords with paintable wire covers or by tacking them to the wall or skirting boards. Keep the cover or tacks enough away from heat sources. This will prevent accidental contact and will protect the cord.
4. Connect the Adapter
A wall-mounted electric fireplace is a great option for a home renovation or for those who do not have the space or money to put in a gas fireplace. They are easy to hang and are ready to use straight from the box. They are an excellent choice for those seeking a modern and stylish design or the warmth the fire can bring. These units can be hung on any wall as art, and they are powered by a fan to provide heating.
It's a great idea to create a list of all the tools and equipment you'll need before you begin the installation process. You can find the complete instructions on how to install an electric fire in the user manual. Some models might require you to screw the brackets directly onto the wall. Other models may include an adjustable mounting plate that is able to slide into slots or hooks on the mounting brackets. If you're installing a recessed unit it is essential to make sure that all combustible substances are removed from around the installation area. In general you should keep these materials at least 3 feet from the front of the fireplace.
After you've checked all components, you'll need to connect your electric fireplace and verify that it works correctly. This is a crucial step, as it will ensure that the flame effect screen and heater work as intended. This will also give you an idea of how the product will look in its final configuration.
Cover the cord when you are confident that it is working properly. This will keep the finished product neat and tidy. You can do this by using paintable wire covers or install an outlet that allows you to tuck the cord behind the unit. This will give your fireplace a seamless appearance.